Feature:
1. Light and compact design, Simple to use front panel controls
2. The color CSTN 5.7” 320X240 LCD displays the FHR, UA curves and the monitoring states. The LCD panel tilted angle can be adjusted within 90 degrees.
3. The system setup can be done very easy at any time and can be stored automatically
4. The internal line thermal recorder can records FHR, TOCO, the life exceeds over 20 years
5. A standard patient event marker and a clinical event marking button to separately mark clinical events
6.Twin monitoring and maternal monitoring（SpO2，NIBP）are available
7. Auto fetal movement are available
8. Multi-crystals, wide beam form, high sensitivity ultrasound transducer, 1MHz pulsed wave, low ultrasound power, safer to the fetal
9. AC or LI-battery operated
10. More than 10 hours data storage, they can be played and reprinted
11. Advanced DSP technology, accurate and reliable
12. Zero noise processing, no undesired sound in the speaker
13. Top lights flash synchronizing with heart beating
14.3 in 1 transducers, no cable intertwisting
15. Build-in interface to the central nurse station

Acceseeries:

(1)1 main monitor
(2)3 in 1 transducers (ultrasound transducer, contraction transducer, remote event marker)
(3)2 transducer belts
(4)1 mains power cord and adaptor
(5)2 paper pads
(6)1 Warranty card
(7)1 250ml bottle of gel
(8)1 The user manual
Specification:

Fetal Heart Rate
Transducer:Multi-crystal, Pulsed Doppler
Strength:<5mW/cm
Working frequency:1 MHz
Signal processing:special DSP system and modern  recognization.
Measurement range:50~210 bpm
Alarm Range:High:  160,170,180,190 bpm, Low: 100,110,120 bpm
Toco
Measurement range:0~100 units
Display
The LCD displays events, date, time, volume, TOCO Ref, alarm state, FHR, TOCO and so on, also it
can store and play back.
Storage:12 hours (including the maternal parameters data storage)
Power Supply:100-240V  AC
Battery type: 8.4V, LI-ION
Battery working time:2 hours (no printer working)
Speaker:1 W
Power consumption:    <40W
Dimension:73H×295W×240D(mm)
Net Weight:1.75 kg
Working Environment:Temperature: 10~40, RH: 10~80%

Transducer Acoustic Output:
Under the requirements laid down in IEC 1157, 1992, the peak negative acoustic pressure
does not exceed 1Mpa. The output beam intensity does not exceed 20mW/cm2
and the spatial-peak temporal-average intensity does not exceed 100mW/cm2

GEL:
Viscous aqueous non-sensitising, hypo-allergenic and non-irritating to skin. Indefinite shelf life,
bacteriostatic (not sterile).